Cybercart Push+ Motor Upgrade Kit - Installation, Start-Up & Manuals
Before You Start: Setup Tips
Make your installation easier and faster with these preparation steps:
Review the whole process at least once before starting. Then, replay and pause as needed during each step.
Place the cart on a table or workbench. This brings the unit to eye level for better visibility and easier access.
Use the uninstalled wheels to prop up the cart frame. This keeps the legs widened, giving you a clear view and crucial space to work inside the unit.
When installing the motor wheels, always grip the center hub (not the tire). This gives you better control to align the wheel through the pivot hole.
PHASE 1: INSTALLATION
PHASE 2: OPERATION & POWER UP
Installation complete? Great. Let's wake up the Cybercart.
1. Power on the Cybercart
- Press and hold the battery power button for 3 seconds.
- The battery lights will turn on.
- You will see a few blinks from all four lights on the control box.
- Status Check: The lights will settle with the Yellow Gyro light solid and the Red Operating light blinking.
The system is now active.
2. Power On the Remote Control
Press and hold the power button on the remote until the display screen lights up. This confirms the remote is powered on and communicating with the Cybercart system.
You're all set!
Note: Remote Control Pairing
Your remote is pre-paired at the factory and should work immediately. However, if you ever need to re-pair it:
- Ensure the Cybercart is OFF.
- On the remote, press and hold “STOP” and “Gyro” together until “Remote Pairing” appears.
- Power on the Cybercart within 10 seconds. The Red operating light will blink to confirm pairing.
Congratulations! Your Upgrade is Complete.
You have successfully unlocked the full potential of your cart. You now have access to:
- The Stealth Caddie: All the power, none of the clutter.
- 36-Hole Battery: Power through your longest days.
- Straight Line Stability: The 6-axis gyroscope keeps you tracking true.
- Total Control: Auto-downhill speed control and electronic parking brake.
The Ultimate Upgrade: Now Unlocked
Your motorized cart is now fully compatible with our Sidekick follow technology. When you're ready, you can add this system for a completely hands-free experience.
Installation Troubleshooting
Run into an issue during the install? Check the table below for quick fixes.
| Issue | Possible Cause | Solution |
|---|---|---|
| Cybercart won't power on | Battery not seated or not charged. | Remove and re-insert battery firmly until it clicks. Ensure it is fully charged. |
| Remote won't connect | Cart off or pairing lost. | Ensure Red light on cart is blinking. If necessary, follow the re-pairing steps in the note above. |
| Front wheel won't fold up | Debris in swivel lock. | Push swivel lock lever upward. Rinse mechanism with water to flush out sand/debris. |
| Wheels do not spin | Motor wire disconnected. | Unplug main connector. Re-plug firmly (silver latch down) until it clicks. Secure with rubber strap. |
Common Questions & Resources
Essential Resources Links:
Q: What do the lights on the Control Box mean?
During startup, all lights will blink. Once ready, the Yellow light (Gyroscope) will remain solid, and the Red light (Operating) will continue blinking to indicate the system is active.
Please refer to the diagram below for a visual guide:
Q: How do I charge the Cybercart battery?
First Charge: Charge for at least 5 hours before first use.
Regular Charging: A blinking red light on the charger means charging is in progress. Solid blue means fully charged. The green lights on the battery indicate the current level.
Q: How do I charge the remote?
Use the included USB-C cable with a standard low-current USB port (like a computer or the port on the Cybercart battery). Avoid high-speed/fast chargers. It takes about 1 hour to charge.
Q: My battery won’t power on. What do I do?
The safety protection may have triggered. Press and hold the power button for 3-5 seconds. If no response, wait 10 seconds for all lights to off, then try again. It may take 2-3 attempts to reset.
Enjoy the walk.
Thank you for choosing Alphard Golf.