UPGRADE YOUR CLUB BOOSTER V2 to V2Pro.
PLEASE NOTE: Orders placed after February 23rd will start shipping the week of June 16th.
We appreciate everyone who has already ordered their Upgrade Kit. Unfortunately due to high demand and new logistical issues, we cannot accept new orders at this time.
Our hope is to have it back on sale again by the middle of summer.
This Upgrade Kit includes our new Speedlock System which allows you to setup at the course in less a minute. No need to tighten clamps or insert/remove wheelie bars. Simply place your cart on top of the axle, pivot the permanently-attached wheelie bars outwards and you're ready to go! Plus, no more Rubber Pads!
You will use the same brackets you already have on your cart. You will be replacing your clamps and installing a landing pad for the new clamps on your V2.
INSTALLATION GUIDES:
VIDEO PLAYLIST: How to install V2Pro Upgrade Kit onto Club Booster V2.
UPGRADE KIT INSTALLATION INSTRUCTIONS (click here)
Never pivot wheelie bars outward while V2 wheels are collapsed inward. V2 wheels must be completely extended apart from each other before you can rotate wheelie bars outward.
So in order to remove your battery, you must have the V2 wheels extended away from each other.
Dennis Z.
Great upgrade. Makes setup so easy. Also makes removal and folding up the cart effortless. Well done.
William K.
What a difference the new setup makes! Not only is it much faster to set up and break down the cart, but overall performance has improved, too. The new wheelie anti-tip wheels and bars are a HUGE upgrade. I no longer have to worry about the cart handling steep hills, bumpy tree roots, or navigating the sides of tee boxes—it's incredibly stable now. With the old setup, I had to constantly guide and stabilize the cart in these situations, but that’s no longer necessary.
The new design also helps the cart drive straighter. While the added weight does use a bit more battery, I can still comfortably walk 18 holes with two lights left. I’m not sure if it will manage the full 27+ holes it did before, but that's a minor trade-off for the improved stability and convenience.
Overall, this is a fantastic upgrade—I have no regrets!
Kerinda R.
Much easier
Mark N.
Love the ease of locking and unlocking on my clicgear cart. The upgrade was agitated difficult to install' but well worth the. Effort.
Darin B.
Great product. Had to wait awhile to receive it. Just wish it was made in the US.
Phillip S.
Have not used it yet, but the installation was easy and makes set up so much easier
Roger G.
Product came after long delay but pleased with product. Installation was difficult as the screws are small and when putting clamp back together aligning the holes was difficult but accomplished. When placing the cart on the drive you had to engage clamps and then open the 2 back supports to lock in the clamps. This was not explained in the instructions. All said I am pleased with upgrade and have 2 friends who want to buy one but understand you do not have any available. Hopefully you will have shortly.
Frank B.
Set screws were very difficult with the screwdriver you provided. They could have been Allen head making them more effective.
It does make assembly and take down so much easier.
David J.
Works great. Much quicker to set up and get rolling.
Bennie C.
Very easy to install and easier to get connect cart. Love them.
P.S. now we need a modified drink holder and sand holder
Dennis M.
I installed it correctly but unfortunately, when extending the left arm out, I pushed the arm towards the handle of the unit instead of away from the handle towards me. This broke a piece that locks the arm in place. I still works but I have to check on it from time to time to make sure it stays parallel to the wheel.
Gary P.
I really like the upgrade. One problem was the instruction to remove the set screws seemed to be incorrect. The unit started to come apart. I put the set screws back in and everything works great.
Scott S.
Upgrade was nicely packaged. Instructions were not the best. However, the videos were very helpful.
Larry K.
You’re not going to want to post my review.
The installation instructions were incomplete. They were missing steps. The first video tutorial had no voice instruction walking us through the process. The second one had , I think, Chinese voice instructions with subtitles?!
There were unnecessary steps in the enclosed instructions. The first time I used it I accidentally placed the cart on the wrong way. There was nothing stopping the extension of the wheel in the wrong direction so now I still have to bend down to fully release the clamps. Am a bit disappointed.
David S.
Well designed. I have the stops on the slide so I just pull the wheels out, put the cart on the axle, put the wheelie bars out and go go go. Very easy. No guessing or measuring how far you have to have the wheels out. I have noticed that the wheelie bars go in a bit towards each other. It would be nice if they locked in place better. A job well done.
James C.
Had trouble with the orientation of the wheels, kept getting them backwards
German Z.
Easy set up and instructions. Love the new design!!
Charles H.
Very easy to assemble .and less hassle to put on!
Tom C.
Very impressed with V2 Pro Upgrade Kit. Parts were well packaged. All parts were there. Instructions good. Video has too many ads and commercials. Never got to see the entire video. The caps and wheelie Wheels were pre-assembled. This caused a problem because the screws did not come out easily and nearly stripped out. Other than this, the install went very well. I have used the new upgrade kit 6 times and love it.
William D.
Saves my back when assembling.
David F.
Arrived in good condition. Easy to assemble. Works like a charm. I love it.
Todd G.
The V2Pro upgrade kit is so much easier to use than the original set up. I absolutely Love it.
Ed C.
Great upgrade, highly recommended. A bit tricky to install on my V2, but now it’s a much quicker setup and pack up, along with a more solid ride on the course.
James C.
Saves lots of time setting up and putting away. Also machine is very tight now. Doesn’t move like it did with the other clamps.
Danny F.
Very easy to set up.
Just follow the directions with the pictures and you’ll be all set.
Paul I.
Finally, a fix that solves one of the weakest parts of the cart system.
I hope it can endure many rounds of golf.
Mark G.
It is so much easier to set up my cart. No more whirly birds, no bunge cords no washing up before I play
Charles K.
The video instructions are bad. The paper instructions are bad. I took my time and deciphered the instructions got it installed and now it's great.
Jim W.
When I got my kit, opened it up all the bolts and washer were lose in the box had to shake the bubble wrap and plastic bag to find some of the bolts and washers. Better instructions for L angles how to install or if needed. So far it has been working well.
David T.
It’s. Very easy to assemble and get to playing golf.
Thomas M.
The kit definitely is faster to set up. The direction are not clear on using the V2 cart Ana if the spacers are needed. But they will help with extended the shaft the same each time.
For some reason the carts function is much better. Less wheelies when climbing hills, in fact zero since the install. Love the V2.
Shaun L.
Took a while to get back order. Best upgrade so far.
khalil m.
Set up took about 2-3 hours but once done definitely speeds up the morning set up. Totally worth it!
William H.
Really love the pro v2 wheels. So much easier to setup. Money well spent.
William C.
Love the upgrade kit. Very convenient.
Tim N.
Works great…nice upgrade
Donald E L.
It's just so much easier to load and unload. Save a lot of time
paul K.
Took about 2 hours while watching tv to put it on….makes it so much easier to use now
Jeffrey V.
A little tedious to install - make sure to dump all hardware into a small box first. Follow written instructions and use videos for reference. Easier if you put the V2 up on a workbench rather than trying to assemble on the floor.
Once assembled, it makes attaching golf cart to V2 at the course much faster. A good purchase.
Jim U.
Easy install, video and instructions were easy to follow. Only difficult thing was the allen head screws on the spacer bars were hard to make adjustments on once they were mounted. Had to remove the bar they attached to every time you made adjustment. Would be easier if they were regular screws
Yongsik K.
I love it. It’s very easy!
Manuel O.
The Alphard V2 conversation to my Clique Gear4 push cart was already an awesome upgrade. When the quick attachment upgrade came out, I bought it instantly. Extremely affordable, easy to install, and makes the set up process a matter of seconds. All of my golfing buddies are jealous of the look, performance, and awesome pricing!!!
Morris M.
The install was harder and took longer than I had expected, but I’m very happy with the results. As expected, the downside is that my wheels no longer fit in the V2 bag, so I’ve had to alter how I stow things, but the setup is much easier now and the wheels feel much more securely connected to the cart!
Alan C.
Nice upgrade! Enjoying how easy it is to set up and play!
Megumi O.
Great improvement
William A H.
A great improvement over the former “training wheels “. Easier setup, and seems much more durable (although time will tell). Only drawback is the inability to totally collapse the large wheels back to the battery unit which makes it wider during storage. Price is fair based on what you are getting. Initial setup was slightly confusing but they sent a well thought out set of directions.
Curtis S.
While I love my Club Booster V2, it was a slight pita to assemble/disassemble. The V2Pro upgrade significantly improves that process. After getting all the hardware switched over ( a bit of a process, even for a handy individual), the new brackets pretty much automatically center, and are then locked in with a 90° twist of the wheelie bars. No more having to get the bracket centered over the shaft, clamp the bracket tight, flip the wheelie bar receiver up into the bracket, then slide the wheelie bar tube into the receiver. The new technology reduces a 4-step process to 2 steps....that's a win in my book. Time will tell regarding the robustness of the new bracket attached to the golf cart, but I imagine it's a relatively cheap part to manufacture (unless it comes from China). I've used the new setup several times already and highly recommend it to other guys in my group who have the old brackets.
Keith R.
Great addition to the Alphard
David B.
Loved how much easier it was with the new setup vs the old. I have had a lot of comments on the course on how it looks, compared to the old setup.
David C.
.
Bob G.
Works great!
Lawrence L.
I love the upgrade kit! It truly makes setting up and packing the unit much, much easier. Also, I believe the on-course stability is better!
Sue R.
The V2Pro upgrade kit is excellent! Just played today and it takes no time at all to get my bag on the cart.
Mark F.
Was pretty simple to install. A little issue with the Clicgear seat attachment on left leg, but was able to get it on after some tweaking.
Eulardi T.
Definitely makes for a better course set up experience.
Kenneth B.
I love the far simpler and shorter set-up before and after a round of golf. Installation instructions were pretty hazy and confusing, especially when the printed and video instructions had the steps in a different order. It worked out because after puzzling through it, it became clear that the order of the steps didn't matter — just independent things to do.
Sandra M.
Had a little problem following the schematic to upgrade my V2.I have used it a couple of times and the new upgrade is so much easier to get it together at the golf course.
William M.
Installation was relatively easy, but not as precise as I thought it would be. Everything else exceeds expectation.
Mike G.
Great upgrade
Saverio O.
I really like the set up. The tip set up is much easier to use and I like the upgrade of the wheels. I have two thoughts. First I thought the instructions were confusing. Out of order and not all that clear. Second, with the way the new brackets attach to the battery if you use the L bracket to center the wheels each time the wheels will no longer collapse to fit the trunk bag. I simply made some marks on the axel and after 6 rounds I have had no issue with tracking. All in all a really nice set up.
david h.
Besides the shipping delay. Everything works great and installation was easy! I love it!
David D.
Love this setup! Have an AT MGI cart but I prefer this Alphard setup the most.
William A.
Outstanding upgrade.
Easy to install and use. Makes set up and tear down easy.
Now if it could shave 5 strokes off my game ...
Richard P.
A little complicated to install, but once in place it makes setting up and dismantling the system a welcome breeze. Well worth the extra investment.
Nariyoshi T.
I have received it but it’s hasn’t been put together yet. Sorry
Bienvenido M.
easier to set up now
Gregory S.
The V2 Pro Upgrade kit made setting up and breaking down the cart and V2 Pro a breeze. It literally took seconds to setup the cart and get it ready to go. Great addition to an already great product/setup.
Jacky H.
The old clamp system was loud and wearing out for me. Buying this upgrade was the best purchase ever. Cart is super smooth and quiet now.
William H.
This makes life so much easier. I'm able to breakdown the cart with ease and set it up in a snap. I love this quick bracket setup
Herbert P.
So far, so good
Only used for one round of play
Warren S.
I've had my v2 motor for 3 years and walked about 300 rounds....or around 6000 in cart rental savings! I love walking but don't like carrying clubs so this was a great conversion for me. With the new quick attachment, the experience is even better as it's one step, easy on and off. When you're 70, it's 95* out, and you just walked 8 miles, the last thing you want to struggle with is cart assembly and this upgrade really solved that problem. super fast put away after a round.
I just replaced my battery so looking forward to 300-400 more rounds!
Robert F.
Works great. Saves a bit of time in setup and worth the price. The video setup is helpful.
Aaron A.
When I received my more order I immediately put it on my cart. Once installed it makes setting up the cart so easy. Unfold, set and pull out the wheels and it’s locked in. Have played three rounds and no issues. Great add on!
Robert G.
I absolutely love it, makes setting up a breeze!!
It took me about 2 hrs to initially install
Charles U.
Installation took longer than expected. We have Clicgear 3.0 carts with seats. The seat bracket was in the way of the U shaped plastic bracket that attaches to the cart. I had to remove the seat bracket and cut about 3/8” off the end of it so the U shaped bracket would clear it. Other than that the V2Pro upgrade works great. It’s so much easier to set up now.
Troy S.
Great upgrade!
Michael C.
It took about 15 minutes to install - very easy with the you tube videos. No more dealing with the old clamps and remembering to put the small wheels on. Faster and easier to get from your trunk to course.
Randall Z.
Great upgrade and easy to snap in and go!
Bruce H.
Great improvement. Install instructions and videos were not good.
doug j.
The new kit makes it way easier to set up my cart.
Ed P.
Instructions need improvement. I relied o videos. Yhey are very helpful.
The lock system is great so much faster
Kirk L.
I can tell the packaging issues have been squared away as all parts arrived well packaged with very good instructions and video links provided.
William G.
Easy installation. Even easier use! A very nice improvement for the cyber cart.
Steven L.
I had the original pre-rollerblade wheels. Even though I got used to the multi-step deployment of the V2 with my Rovic, it was still a little bit of a pain after the round was over to release and remove the wheelie bars. When I saw the upgraded version, I knew it would be great. Installation was straightforward and the way it connects/disconnects from the Rovic just by rotating the wheelie bar is fantastic! 5*!
John W.
Great upgrade. Makes getting everything set up so much easier. The rattle of the old wheels is gone. Highly recommend.
David G.
The instructions and video are absolutely terrible. Luckily, it’s not that complicated to figure out. Alphard needs to fix this. Only 2 of the 4 predrilled holes on the new brackets lined up with my Pathfinders wheel bracket cart holes. However, only one on each side seem to work ok given how they rest on the cart frame. Also unsure about the spacer bar functions. On my cart they don’t seem to have any function. BUT, once installed, this new system is SO much easier to install and uninstall the axle. A huge plus!
Brian H.
What a great improvement! Attaching and detaching the cart from the battery pack/wheels is so much easier than the original attachment and wheelie bars. The upgrade installation instructions were not very clear, however and the purpose of the spacers was not explained. I didn’t bother to install them as they appeared to be optional. I’ve used the upgraded setup several times so far with no issues.
John M.
Much better than the original wheels. No more kneeling down to put the anti tip wheels on. Quite satisfied.
William H.
Followed directions and video and took about 1/2 hour to make the change over
Jerald M.
The new up grade is fantastic. So much easier to set up and go!
Eric L.
Good product!!!
George S.
So much easier to set up.
Timothy
So far, it's helps on the initial set-up especially not having to with wheely wheels, but concerned about all the added screws to fasten unit to cart. So far I'm in favor of improvement
Gary A.
The V2 upgrade went on quite easily. The only thing which was not per the instructions was the pieces which mount around the axle were screwed together and had Loctite on them. This required disassembly of these pieces for each side and added a few minutes to the project. Once the changeover was completed the entire unit went together quite nicely.
Mark L.
Love the new design so much simplier and faster.
Installation was pretty straight forward.
I have encountered a problem with the support brace falling off, but I am working with customer support to get replaced.
Everett T.
Labor intensive but once done, so cool!
Kenneth L.
This is a V1 Body that was converted with a V2 motherboard, wheelie bars don’t fold all the way under the body when disengaged but apart from that, works great! No more bending over and loose and dropping wheelie bars.
Kelly
The wheels go in and out but the wedges don’t snap in correctly, they only go in half way.
Great upgrade
Justin M.
I was excited to get this to make the setup and take down at the course a little easier. Boy was I disappointed to learn that the carrying case I use for my Club Booster V2 would no longer work because the wheels have to stay extended an additional 4 inches or so and they wheels will no longer fit. Didn't even install the brackets, instant return. I wish they would have mentioned that in the description.